## Summary
Wi-Fi does not work on gbOS86. The Wi-Fi device is detected on PCI but no driver is ever bound to it, so there is no
## Hardware
- Laptop: HP Laptop 14-ep0xxx, board 8DBE, BIOS F.19
- CPU: Intel Core i3-1315U (13th gen, no AVX-512)
- Wi-Fi: Realtek RTL8852BE-VT, PCI
- Bluetooth: USB
## Software
- Kernel:
- Image: [built with ./build.sh on DATE / downloaded release NAME / host-tailored auto image?]
- Boot: from USB stick,
## What the log shows (hwdetect.txt)
-
-
-
-
-
- No
## What I tried
1. First boot had
2. Set
3. Added
## Checks on the stick
-
-
-
## Suspected cause / request
RTL8852BE-VT (10ec:b520) needs
## Everything else (detected, driver bound)
i915 + eDP 1920x1080, backlight, SOF audio (ALC236), touchpad SYNA32DD:00 06CB:CE17, HP True Vision FHD camera, Bluetooth hci0. [add which of these actually work]
## Attachments
- hwdetect-LOAD_WIFI0.txt
- hwdetect-LOAD_WIFI1.txt
- [optional] stage0-dmesg.txt (DEBUG_LOGS=1)
Wi-Fi does not work on gbOS86. The Wi-Fi device is detected on PCI but no driver is ever bound to it, so there is no
wlan0. In Android, the Wi-Fi toggle turns on and switches itself off again in under 10 seconds. Bluetooth (same combo chip) works.## Hardware
- Laptop: HP Laptop 14-ep0xxx, board 8DBE, BIOS F.19
- CPU: Intel Core i3-1315U (13th gen, no AVX-512)
- Wi-Fi: Realtek RTL8852BE-VT, PCI
0000:03:00.0, class 0x028000, ID 10ec:b520 (alias pci:v000010ECd0000B520)- Bluetooth: USB
0bda:b86a, driver btusb, firmware rtl_bt/rtl8852btu_fw.bin loads fine## Software
- Kernel:
6.18.21-gbos-whl #46 (Wed Nov 4 07:14:14 UTC 2026)- Image: [built with ./build.sh on DATE / downloaded release NAME / host-tailored auto image?]
- Boot: from USB stick,
MODE=ask## What the log shows (hwdetect.txt)
-
pci devices without a driver lists 0000:03:00.0 0x028000 0x10ec:0xb520-
lsmod has no rtw89_* modules at all-
net lists only virtual interfaces, no wlan0-
hwdetect: devices after 5s / 15s: wifi= bt=hci0 (wifi empty)-
rfkill lists only hci0; missing firmware is empty- No
rtw89 lines in dmesg and no hwdetect: loaded ... line for Wi-Fi, so no probe was even attempted## What I tried
1. First boot had
LOAD_WIFI=0 in gbos.cfg (hwdetect.txt attached as hwdetect-LOAD_WIFI0.txt).2. Set
LOAD_WIFI=1. The log confirms loaded gbos.cfg: ... LOAD_WIFI=1, but the result is identical (hwdetect-LOAD_WIFI1.txt).3. Added
MODOPTS="rtw89_pci.disable_aspm_l1=y rtw89_pci.disable_aspm_l1ss=y rtw89_pci.disable_clkreq=y rtw89_core.disable_ps_mode=y". No effect, since the module never loads.## Checks on the stick
-
rtw89_8852bte.ko present: [YES / NO]-
rtw89_8852b.ko, rtw89_pci.ko, rtw89_core.ko present: [YES / NO]-
gbos/firmware/rtw89/rtw8852bt_fw*.bin present: [YES / NO]## Suspected cause / request
RTL8852BE-VT (10ec:b520) needs
rtw89_8852bte and firmware rtw89/rtw8852bt_fw.bin. It is a different module from rtw89_8852be (10ec:b852). It has been in mainline since 6.12, so 6.18 has the code. I suspect CONFIG_RTW89_8852BTE is not enabled in the gbOS86 kernel config (or the module is not in the shipped module set / not matched by hwdetect). Could you check, and enable it if so?## Everything else (detected, driver bound)
i915 + eDP 1920x1080, backlight, SOF audio (ALC236), touchpad SYNA32DD:00 06CB:CE17, HP True Vision FHD camera, Bluetooth hci0. [add which of these actually work]
## Attachments
- hwdetect-LOAD_WIFI0.txt
- hwdetect-LOAD_WIFI1.txt
- [optional] stage0-dmesg.txt (DEBUG_LOGS=1)